|
![[Product Image]](Ppc1000.jpg)
The PPC-1000 is an easy to use programmable-pressure generator and controller. Pressure levels from -300 mmHg to +300 mmHg are generated by a stepping motor-driven bellows, thereby eliminating the need for a pressure source. This stand alone system is ideally suited for small fixed volume applications where programmable pressure levels are required to be set rapidly
Key Benefits
-Provides easy RS-232 (serial) Interface to PC's
-Sample PC-based Software included which demonstrates functionality of the
unit
-Low cost component of a complete Baroreceptor Stimulus / Response System
-Complete internal diagnostics
-LCD provides controller status information
Specifications
-Pressure Range +/- 300 mmHg
-Pressure Accuracy +/- 0.25 mmHg
-Nominal Pressure Step Rate 300 mmHg/Sec
-Interface Connector DB-25 (male)
-Size 14" x 14" x 10"
-Weight approximately 26 lbs Functions/Error Codes
| RS |
Reset System |
E01 |
Unrecognized Command |
| CS |
Check Limit Switches |
E02 |
Positive Limit Reached |
| CL |
Perform Leak Check |
E03 |
Negative Limit Reached |
| CP |
Strip Chart Calibration |
E04 |
|
| ED |
Enable Drive |
E05 |
Motor Failure |
| DD |
Disable Drive |
E06 |
Motor Indexer Failure |
| GPxx |
GOTO Pressure xx |
E07 |
Function not enabled |
| GTxx |
GOTO Pressure on Trigger |
|
|
| CB |
Center Bellows |
|
|
| MP |
Move to Positive Switch |
|
|
| MN |
Move to Negative Switch |
|
|
| MZ |
Move to Zero Switch |
|
|
| * |
Stop |
|
|
| SP |
Send Current Pressure |
|
|
| LV |
List Software Version |
|
|
| SE |
Resend Last Error Code |
|
|
| V1O |
Open vent valve |
|
|
| V1C |
Close vent valve |
|
|
| DP |
Send Motor Position |
|
|
Pricing
| Description |
SKU # |
Price |
| PPC-1000 Programmable Pressure Controller |
sku-1 |
call |
| PPC-1000 University Program Unit |
sku-2 |
call |
| PPC-1000 External R-Wave Trigger Box |
sku-3 |
call |
Software Support
-Playfile.bas - This is a Microsoft QBasic program that will "play" a file of ppc commands to the ppc-1000. Command files should be plain ASCII text. Click here to download.
-Ppcterm.bas - This is a Microsoft QBasic program that provides an immediate interactive way to send commands to the ppc-1000. Commands are typed in a "terminal" window. Click here to download
-PPC User Manual - The complete (updated) manual is here in Microsoft Word (97) format. Click here to download.
|
